WIRELESS PET FENCE SAFETY TIPS AND HINTS

Wireless Pet Fence 4 Less wants to make sure that your experience using one of our many wireless pet fence systems is a pleasurable experience. Here we have included some safety tips and hints to help you with this process.

• To avoid accidental corrective pulses the collar must always be in contact with the transmitter or the system will think the pet has left the containment area.


• The transmitter should be placed in an inconspicuous area to avoid potential damage.


• We advise that owners not leave the collar on the pet while inside the house to prevent unnecessary signal interruptions that could be caused by some household appliances.


• The pet collar receiver has a waterproof feature, but not the transmitter. Do not allow the transmitter to get wet or else the emitted signal may be negatively affected.


• Please keep in mind that the system will not work well if the containment area has a drop-off or steep slop. This only means that a wireless system may not be the right solution for you, but another electronic containment fence could be.


• Another key factor is the size and attitude of the pet. If the pet is large and known for being stubborn, the wireless pet fence might not be the most effective solution for you.


• For a reliable set up and optimal safety, follow the instructions in the provided manual that explains training and installation, or ask customer service for assistance.


• You can adjust the range of the device so that it suits your yard and you can adjust the correction level of the pulses received by your pet.


• Use the training flags to mark the boundary area to make it easier for you and your pet to memorize.


• For multiple pets in the home, we have extra transmitters and training collars available.


• There is an Automatic Safety Shut Off Feature with the wireless pet containment fence systems to ease the worries of unwanted power loss.


• The wireless pet fence is so easy to install and no wires to bury.