Above Ground Installation

From the most trusted brands, to the customer's doorstep, Wireless Pet Fence 4Less aims to bring nothing but only the best wireless pet fence systems that dogs and owners deserve. We are delighted to introduce a latest technological development that will give a total ease in underground fencing.

There has always been a misconception about needing to bury underground fencing systems. That impression is simply fallacious. However, we still recommend burying the wire so owners don't practically need to deal with it over and over again.

For dog owners dealing with this dilemma and are doubtful to buy a wireless pet fence, here's an interesting and truly helpful product especially created for various containment needs.

Bid containment problems goodbye with the underground wireless pet fence. The Wire Securing Staples is the perfect solution to installation difficulties. All owners have to do is to lay the wire down and after a good rain the wire will sink and owners won't be able to see it again. This is called above ground installation.

Here are the steps to be followed in setting up wireless pet fence systems using above ground installation.

Step 1:

» First lay out the boundary wire in the desired shape and around the area owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once owners have decide the system owners chose is correct for owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for owners and the guests.

 

 

View Cart Checkout
0 items in your cart
 
Image(s) may not reflect the product(s) being sold.
New Customer Service Hours:
Mon - Th: 9:00am - 11:00pm EST
Fri-Sun: 9:00am - 7:00pm EST
If you have any questions just give us a call:
**UNLIKE OUR COMPETITION WE HAVE NO HANDLING FEES OR HIDDEN CHARGES**